P6mm Indoor SMD LED Display Panel 64x32dots

P6mm

  • Pixel Pitch: 6mm
  • Module Size: 384*192mm
  • Module Resolution: 64*32
  • In Stock
  • CE,RoHS,FCC Approved
  • 2 Years Warranty
Get Quote Now !

P6mm indoor LED Display Module with 32X32dots, 192mmx192mm P6mm Indoor SMD3528 LED module with high brightness, best price Ph6mm LED screen panel LED Sign Board for indoor LED display.

Remark:

1. LED Module Including the Data & Power Cables.

2. Epistar LEDs, 2 Years Warranty, Ship in 24 hours,Free Online Support.

3. LED Module Can Work With Xingwei,Novastar,Colorlight,Xixun LED Conrol Card Etc.

P6mm Indoor LED Display Module Parameters:

ModelXingwei-P6-I-32X32
1.LED
SMD3528
ColorPackageIntensityView AngleWavelengthTest Cond.
RedSMD 3528150mcd140/140620nm25℃,20mA
GreenSMD 3528400mcd140/140520nm25℃,20mA
BlueSMD 3528100mcd140/140470nm25℃,20mA
Resolution32(H)×16(V)
Pitch6mm
LED ArrangementSMD3528
Driver ModeDynamic 1/16 Duty constant current
Size192mm×192mm
MaskPure Black mask-high contrast screen
3.Electricity Parameter
Optical Ratings
Brightness800-1000 (Nits)
View Angle140 degree ( horizontal)  140degree(vertical)
View Distance6m-60m
Gray Scale8bits input, correction with 16bits
Display Color16.7M
Brightness Adjustment100 levels
Power Supply
Operation PowerAC100-240V 50-60HZ  Switch-able
Maxim Power Consumption700 W/m2
Average Power Consumption400 W/m2
Control System
Correction Scale Level16bits
Frame Update Frequency60Hz
Screen Refresh Frequency480-960Hz
Gamma Correction-5.0—5.0
Support InputComposite Video, S-Video, DVI, HDMI., SDI, HD_SDI
Control DistanceEthernet cable 100m, optical fiber 5km
Support VGA Mode800×600,1024×768,1280×1024,1600×1200
Color Temperature5000-9300 adjustable
Brightness Correctiondot by dot, module by module, cabinet by cabinet
Reliability
Operating Temp.-20-60 Celsius degree
Operating Humidity10-95% RH
Operating Life100,000 hours
MTBF5000 hours
Continuous Working Time≥48 hours
Protection LevelIP54
Out of Control Pixel Rate0.01%

LED Display Module Aging & Testing

LED Display Module aging and testing is refers to imitate the long time operation without working problems,it is the most important to ensure the reliability of the LED display. LED display can be more stable after aging, and it can help the use of the efficiency. led screen aging test is a very important link in quality control.

LED display module aging test

The LED aging test is based on the product’s failure rate curve, which is the characteristics of the bathtub curve, and the countermeasures are adopted to improve the reliability of the product.The indoor led module aging method includes constant current aging and constant pressure aging. A constant current source is that the current is constant at any time. The frequency is not constant. That’s communication or pulsating current. The communication or pulsating current source can be described as the effective value stable, but this power supply cannot be called “constant current sourceâ€.Constant current aging is the most consistent feature of LED current operation and is the most scientific method for the aging of LED displays. Over current impact aging and manufacturers the latest clothing design school chooses an aging technique, after using the frequency adjustable, current adjustable constant current source for such aging, in order to judging the quality of the outdoor led module in a short time and can pick out the dangerous LEDs make sure the led display module working well after installation.

LED display module Aging test

The aging of LED display is divided into white balance aging (2×24 hours) and video aging (24 hours).totally 72 hours before packing.

Aging test process of led display screen:

  1. Check the led display module to install all correct.

  2. Check whether there is a short circuit or not.

  3. Check whether the module is flat and neat.

  4. Check whether the appearance is intact or not.

  5. Use the online led control system to light up.

Make sure the testing time is continuously light for more than 72 hours

LED display module Panel

After the aging test, please check the quality control group for parameters.Test content: white balance, red, green, blue,gray gradient,video effect,text effect.after 72 hours aging test,the problem should be reported to the manager of the engineering department in a timely manner.replace or repair the broken leds. making sure all parts will be working well stably before packing.


Tech Support

Xingwei LED has a professional technical support team to solve any tech problem for you, tech support covers installation, configuring, and anything about LED display, please check our contact us page.

Bookmark & Share